[Justao]

Attaching the pics of eventuri inlets installed

[Dr Thrillride]

Originally Posted by Justao

Attaching the pics of eventuri inlets installed

Excellent, thanks, guess mine are backordered.

[fmzip]

Any hopes for one coming out for the M850i?

[naiza3k]

Anyone have cel issues with this installed?

[Justao]

Originally Posted by naiza3k

Anyone have cel issues with this installed?

No CEL no issues at all, have those installed for a year now

[r33_RGSport]

Originally Posted by naiza3k

Anyone have cel issues with this installed?

Issues has been fixed for sometime now.

[naiza3k]

Originally Posted by r33_RGSport

Issues has been fixed for sometime now.

Is it just with the new replacement silicon gasket? I just did mine and for whatever reason CEL is still back.
The weird thing is I didn’t have any cel issues for about 5k miles and out of the blue it came on. Reached out to Eventuri and they sent the gasket, installed, erased code, and drove about 15 miles and came back on.

[r33_RGSport]

Originally Posted by naiza3k

Is it just with the new replacement silicon gasket? I just did mine and for whatever reason CEL is still back.
The weird thing is I didn’t have any cel issues for about 5k miles and out of the blue it came on. Reached out to Eventuri and they sent the gasket, installed, erased code, and drove about 15 miles and came back on.

Hmm.
If you have replaced the gasket and still get CEL, check the O-ring and scan the car what’s the CEL code.

[naiza3k]

Originally Posted by r33_RGSport

Hmm.
If you have replaced the gasket and still get CEL, check the O-ring and scan the car what’s the CEL code.

The code came back as 16050A. Which o ring are you referring to?
I went back and losened one side of the screws thinking maybe I over tightened it. Still no luck 🤦🏿‍♂️

[r33_RGSport]

Originally Posted by naiza3k

The code came back as 16050A. Which o ring are you referring to?
I went back and losened one side of the screws thinking maybe I over tightened it. Still no luck 🤦🏿‍♂️

The O-ring on the Turbo inlet where it connect to the turbo itself.
Make sure that you didn’t get it backward or damaged.
That code is crankcase ventilation, so check for any other vacuum or air hoses connected to the engine. Even the oil cap. Maybe it is not fully seated or tightened.
If everything is good, try re-install the stock turbo inlet and see if it still throwing the same error.

[Dippydo]

Originally Posted by naiza3k

The code came back as 16050A. Which o ring are you referring to?
I went back and losened one side of the screws thinking maybe I over tightened it. Still no luck 🤦🏿‍♂️

That not the intakes. You might off knocked another hose loose or something else that’s just a coincidence. Installed mine and no issues.

[naiza3k]

Originally Posted by Dippydo

That not the intakes. You might off knocked another hose loose or something else that’s just a coincidence. Installed mine and no issues.

I can’t imagine where another hose could be knocked lose. Double checked and everything is on tight for connections.
I went back and took out the new silicone part from Eventuri then reinstalled and retightened the screws. Reset the cel and so far drove about 10 miles on the car and cel hasn’t come back yet. Crossing my fingers.