11-05-2023, 06:26 AM | #89 | |
BMW Noob
384
Rep 202
Posts |
Quote:
|
|
Appreciate
0
|
11-12-2023, 07:49 AM | #90 |
Private First Class
230
Rep 124
Posts |
What is the diameter of the primaries on the exhaust manifold? Was looking at the supersprint manifold to keep the crossbank configuration but they are 37mm ID which may be too small.
|
Appreciate
0
|
11-13-2023, 03:58 PM | #91 |
BMW Noob
384
Rep 202
Posts |
My manifold is fab’d with 42mm ID primaries and doesn’t have any pinch points like the OE or even the Supersprint manifold has. My shop actually had a car (F10 M5) in right before mine in which was getting some hybrid turbos and customer had bought the Supersprint manifold for his build. They said it was terrible. Fitment was off left to right and the tubing was barely larger than OE. They didn’t even end up using it.
|
Appreciate
3
|
11-14-2023, 12:00 AM | #92 | |
Private First Class
230
Rep 124
Posts |
Quote:
|
|
Appreciate
0
|
12-16-2023, 07:12 AM | #93 |
Second Lieutenant
113
Rep 219
Posts |
It’s been a hot minute since we have heard an update. How is this coming along?
|
Appreciate
4
|
12-17-2023, 09:50 AM | #94 |
BMW Noob
384
Rep 202
Posts |
I wish I had some progress updates to share but we have been at a stand still waiting on machine shop to finish engine work as well as still waiting on hot side turbo system to come back from heat shielders. Hoping to get an updated ETA this week but with holidays approaching I’m not too optimistic for anything quick. As a lesson to anyone contemplating builds like this, expect delays, it’s inevitable. There are just too many moving pieces to expect that everyone will be able to get to your stuff when you are ready. With that said I’ll share any updates I get here shortly and hope everyone has a good holiday!
|
Appreciate
4
|
01-19-2024, 10:22 AM | #96 |
Private
417
Rep 89
Posts
Drives: x7 and M8GC
Join Date: Sep 2021
Location: CA
|
Same..any updates? Dying to see the progress of your build. Most exciting thread thus far.
|
Appreciate
0
|
01-19-2024, 10:59 AM | #97 |
BMW Noob
384
Rep 202
Posts |
Hoping to have some better updates next week guys. Engine assembly is underway and they were waiting for the newer cam lock and spring tools needed to complete the rebuild. Can’t do final test fit of proto printed manifolds until engine is done and we can slide it back in to check clearances. As soon as that is done first CNC’d set will be ordered. Hot side turbo and header manifold parts are due back from heat shielding any day now. Rear drag brake kit almost done, waiting on rotors. New drag wheel setup with rear 17” beadlocks are done and shipping today. Waiting on rear axle removal tool to get measurements needed for some new stronger rear axles. Still going back and forth trying to get custom carbon fiber driveshaft spec’d out. Will share updates on all these with some pics next week. It’s frustrating how long everything takes as it’s always one thing holding everything else up. Stay tuned.
|
Appreciate
4
|
01-25-2024, 11:31 AM | #98 |
BMW Noob
384
Rep 202
Posts |
Ok not the big progress update i was hoping to be able to share but this is what I got. Engine assembly tools (cam lock and spring tools) are in and missing retainers from Carrillo have arrived. Engine assembly should be completed end of next week or early the following so it can finally go back in car to final test fit proto intake manifolds, fuel rails and mark locations for remaining intercooler charge pipe fab. Hot side turbo housings and manifolds were supposed to arrive yesterday but still had not shown up yet so sorry no pics to share. Axle tool arrived and rear axles are out so we can complete measurements for new upgraded rear axles. Hitting some walls on trying to get custom driveshaft spec’d as nobody has an adapter flange designed to work with F9x rear diff yet. In communication with Men’s Motor out of Russia to potentially buy the same upgraded unit they have come up with for their shop M8 GC…we’ll see if this works out. Received machined fittings/connector we designed up for our coolant expansion tank so we can keep stock hose and level sensor connections (pics below). Rear drag brake setup just about complete, they had to redo rotors as first set was messed up and this should be complete and ready to ship to me early next week. Pics of mock-up minus rotors on rear carrier below. Drag wheels are done and arriving today. First set VFC has completed in M8 offsets I believe. 17x11 rears and 20x10 fronts. Hopefully next update will be engine back together and going back in car so remaining fab can get get finished while I kick off order for CNC’ing set of first ever port injection manifolds for F9x platform. From there it will be a little wait but we’ll get the underhood fab work and rear brake setup components out for powder coat while we wait. Thankfully the weather sucks here and there is still snow and salt on the ground so this long wait isn’t killing me just yet. I know the tuning phase of this is going to be a bitch but it will feel great when the mechanical side of the build is complete.
|
01-25-2024, 11:35 AM | #99 |
Brigadier General
4601
Rep 3,546
Posts |
Great update still!!!! Cannot wait to see this beast come to life and thank you for blazing the path. Do you plan to attach the 1/2 mile runs or strictly 1/4??
__________________
2022 M8 Comp Convertible
2023 718 Cayman GTS 4.0 2019 718 Cayman Base 2015 M235 Manual On the list for the M2 CS |
Appreciate
0
|
01-25-2024, 12:36 PM | #100 |
BMW Noob
384
Rep 202
Posts |
I’m sure at some point I’ll plan to do a half mile event once all the kinks are worked out and I’m satisfied with how it’s running
|
Appreciate
0
|
02-02-2024, 04:46 PM | #101 |
BMW Noob
384
Rep 202
Posts |
Quick updates. Rotating assembly complete on engine, on hold waiting for correct valve springs to arrive to finish heads (they shipped wrong ones first time around 😒. Custom rear brake kit has arrived and fit up will happen next week to ensure all is good before calipers come back off for powder coaters pile with other fab stuff some of which is still to be completed. Here are some pics of most hot side turbo stuff back with heat shielding completed (they do awesome work but man it definitely is not a quick turn around!). Found source and placed order new custom carbon fiber drive shaft (most places had no solution for working with F9x diff). Rear axle measurements completed so new custom rear axles should be in the works soon. That’s all for now, engine assembly is really the big hold up right now so hopefully it won’t be much longer.
|
02-02-2024, 05:43 PM | #102 |
Brigadier General
4601
Rep 3,546
Posts |
WoW, Great update, I know how it feels when doing process like this and little things start to add up on set backs and time.... lol Can't wait to see this beast come to life!
__________________
2022 M8 Comp Convertible
2023 718 Cayman GTS 4.0 2019 718 Cayman Base 2015 M235 Manual On the list for the M2 CS |
Appreciate
0
|
03-08-2024, 09:38 PM | #105 | |
BMW Noob
384
Rep 202
Posts |
Quote:
Finally at least a dim light at the end of the tunnel as all the hard parts to complete the physical build are either in house or are confirmed in process. |
|
Appreciate
4
|
03-09-2024, 07:54 AM | #106 |
Brigadier General
4601
Rep 3,546
Posts |
Hell what they want for that drive shaft? Also awesome update thanks for keeping us all updated again.
__________________
2022 M8 Comp Convertible
2023 718 Cayman GTS 4.0 2019 718 Cayman Base 2015 M235 Manual On the list for the M2 CS |
Appreciate
0
|
03-09-2024, 08:04 AM | #107 |
BMW Noob
384
Rep 202
Posts |
|
03-09-2024, 11:59 AM | #108 |
Private First Class
88
Rep 109
Posts |
Awesome news that everything parts-wise is basically in or about to be in. That’s probably the biggest delay. Seems like your almost there—the day you do the first WOT pull all this will be worth it lol.
|
Appreciate
0
|
03-09-2024, 04:55 PM | #110 |
BMW Noob
384
Rep 202
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|