[Thewhatchow]

Originally Posted by Doc73

https://lookaside.fbsbx.com/file/BMW...kMS4yM4Gq1FvSw

Hey man! The link is dead again, is it possible to update it?

[Doc73]

Hi,
I attached pictures then

[Kansr]

Originally Posted by Doc73

Hi,
I attached pictures then

Thank you!

I suspected scrolling down with the original ‘defaulted’ entry. Once you first enter that data library, but wasn’t too sure.

[Doc73]

I used bimmercode in expert mode for coding

[bmbog]

Hey guys, I was able to do the coding but found the bowers speakers stay on the original color unless I use the "white lightning" setting to force them white. Guessing there's another set of bytes somewhere. Anyone know where?

As an aside, It also appears from my experiments that the Group 1 color bytes control the door strips and center console strips, group 2 does the floor wells and group 3 is overhead map lights.

Could be interesting the code in a 3 color scheme...

[Kansr]

*Edit….

After a few attempts was able to successfully code Red.
As a note 345,8910,131415 was set to bronze in the menu and not white…in case anyone out there is having no luck.

[Justao]

Originally Posted by Kansr

*Edit….

After a few attempts was able to successfully code Red.
As a note 345,8910,131415 was set to bronze in the menu and not white…in case anyone out there is having no luck.

Is this only for stripes or for B&W speakers as well?

[bloozemanAZ]

Originally Posted by Kansr

*Edit….

After a few attempts was able to successfully code Red.
As a note 345,8910,131415 was set to bronze in the menu and not white…in case anyone out there is having no luck.

But that's just the door midrange drivers correct? I do not believe (or at least have not seen anyone with success) that can change the diamond tweeters in the door from anything other than the stock two colors which white is the best.