[JonArcher06033]

Hey all!

Having an issue with drivers door window...

Have the bring to dealer every few months for a readjustment.

It won't go all the way up into the seal and leaves an air gap allowing in a lot of wind, noise and in some instances drops of water.

Anyone else with issue? Only drivers door but then again I'm the only one in the car usually.

[Resjudicata]

Originally Posted by JonArcher06033

Hey all!

Having an issue with drivers door window...

Have the bring to dealer every few months for a readjustment.

It won't go all the way up into the seal and leaves an air gap allowing in a lot of wind, noise and in some instances drops of water.

Anyone else with issue? Only drivers door but then again I'm the only one in the car usually.

I have this problem too. But it's an easy fix for me to push up. If I hold it, it works. Or double tap.

If I pop the up one time, it leaves a gap. If I do it again or hold it, it closes completely.

Same when I lower. If I drop it, it goes 90% and I have to push down again to get 100% down.

[RJC-1]

There's a way to reset this via the switch, turn ign on, start with fully closed window then press and hold the switch all the way down and keep holding for a few seconds after it stops then holding all the way up and keep holding for a few seconds after it stops then release. This is mainly used when the auto up/down feature isn't working and may also help when not closing fully.

[JonArcher06033]

Originally Posted by Resjudicata

I have this problem too. But it's an easy fix for me to push up. If I hold it, it works. Or double tap.

If I pop the up one time, it leaves a gap. If I do it again or hold it, it closes completely.

Same when I lower. If I drop it, it goes 90% and I have to push down again to get 100% down.

Ahh. This is when I open and close the door actually. But I'll be in the lookout for this too

[RJC-1]

This may do the trick/they all work similarly

https://gmauthority.com/blog/2020/07...ower-loss/amp/