Quote:
Originally Posted by MACHT
Well there's actually more to fully enable anti-dazzle:
BDC Body Domain Controller LUT_AFS_CODRV_HOR standard/init
BDC Body Domain Controller LUT_AFS_DRV_HOR F040_G005_AHL...
BDC Body Domain Controller LUT_FLC_FORWARDLIGHTING_Y AFS
BDC Body Domain Controller C_AFS_ENA aktiv
BDC Body Domain Controller C_AFS_ECO_LEVEL_3_ENA enable (1)
BDC Body Domain Controller C_HBA_ENA aktiv
BDC Body Domain Controller C_HBA_DIM_ENA enable (1)
BDC Body Domain Controller C_HBA_GFHBA_ENA_V_HI standard (3C)
BDC Body Domain Controller C_HBA_GFHB_ENA aktiv
BDC Body Domain Controller C_CLC_CURV_V2 ECE (23)
BDC Body Domain Controller C_CLC_CURV_V3 ECE (28)
BDC Body Domain Controller C_CLC_EXT_ENA enable (1)
BDC Body Domain Controller C_FLC_ENA aktiv
BDC Body Domain Controller C_BLC_PRE_ENA enable (1)
This is only accessable via ProTool:
KAFAS4 3100 COMMON COUNTRY_VARIATION Europe_RC [01]
KAFAS4 3102 LIGHT DETECTION C_FLA_CC_MESSAGE_3 no_CC_message [00]
KAFAS4 3102 LIGHT DETECTION C_FLA_COUNTRY_WITH_MULTIPLE_REFLECTORS active
KAFAS4 3102 LIGHT DETECTION C_FLA_US_SENSITIVITY_MODE normal [0]
KAFAS4 3102 LIGHT DETECTION C_FLA_BS_ENTER_THRESH Rest of world [03)
KAFAS4 3102 LIGHT DETECTION C_FLA_BS_EXIT_THRESH Rest of world [02]
|
I have verified every setting in my car is set correct, I removed 5AP but they still aren't working :-(
Update: went for a drive from Fort Worth to Dallas, the high beams come on and stay on alllllot more. I noticed they would shut off as I passed a car and would come right back on.. since the highway is well lit I couldn't see a big difference.. maybe I'll go for a drive in the county tomorrow.